Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4x1 Computer Graphics Video & Stereo Audio Standby Switcher
Series: Main
Model: VP-411DS
Part #: 51-70654190
- High Bandwidth - 300MHz (-3dB)
- Looping Input - Input 1
- Automatic Standby Switching - Priority can be set for each of the 4 inputs via DIP-switches
- Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled
- Primary Input - Selectable
Product Info
Tech Specs
Documents
The VP-411DS is a high-performance switcher for computer graphics video signals, with-resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. When configured as a standby switcher, the switching priority can be set for each of the four inputs.
- High Bandwidth - 300MHz (-3dB)
- Looping Input - Input 1
- Automatic Standby Switching - Priority can be set for each of the 4 inputs via DIP-switches
- Kr-isp® Advanced Sync Processing - Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr-isp® advanced sync processing can be enabled or disabled
- Primary Input - Selectable
- Flexible Control Options - Front panel, RS-232 (K-Router™ Windows®-based Kramer software is included), contact closure, & IR remote (included)
- Output Disconnect
- Front Panel Lockout
- Desktop Size - Compact size. 2 units can be rack mounted side-by-side in a 1U rack space with an optional RK-1 rack adapter
- Rackmountable - Yes
- Supported Resolution - UXGA (1600x1200)
- Switcher Audio Input Signal Type - Stereo Audio
- Switcher Connector Type - Other
- Switcher Type - Audio
- Switcher Type - Computer
- Switcher Type - Video
- Switcher Video Signal Supported - Component
- Warranty - Yes
- Spec Sheet available - Yes
- Product Weight: 2.43 lbs
- Number of Inputs: 4
- Number of Outputs: 1
- Current Draw: 0.23 Amps
- DC Voltage: 12 Volts
- Depth: 6.40 in
- Height: 1.70 in
- Width: 8.46 in
- Inputs: 4 UXGA with loop on IN 1 on 15-pin HD connectors, 4 unbalanced stereo audio with loop on IN 1 on 3.5mm mini jacks
- Outputs: 1 UXGA on a 15-pin HD connector, 1 unbalanced stereo audio on a 3.5mm mini jack
- Max. Output Level:
VIDEO: 1.8Vpp
AUDIO: 7.2Vpp - Bandwidth (-3dB):
VIDEO: 300MHz
AUDIO: >40kHz - Diff. Gain: 0.03 %
- Diff. Phase: 0.06 deg
- K-Factor: <0.05 %
- S/N Ratio:
VIDEO:73dB @5MHz
AUDIO: 93dB - Crosstalk (All Hostile):
VIDEO:–50dB
AUDIO: –72dB @1kHz - Controls: Input selector; PANEL LOCK and OFF pushbuttons; IR remote control reception window; connector for extended IR reception; RS-232 connector; contact closure terminal block for external wire switching; input priority selector DIP-switches; normal/Kr-isp® and program/normal mode selectors via slide switches on the underside
- Coupling:
VIDEO: DC
AUDIO: DC - Audio THD + Noise: 0.004% @1kHZ
- Audio 2nd Harmonic: 0.002% @1kHZ
- Accessories: Power supply, IR remote control
- Options: RK-1 19" rack adapter, external remote IR receiver cable
- Input Signal Types: Computer Graphics Video
- Output Signal Types: Computer Graphics Video
- Rack Units (Height): 1
- Regulatory Compliance: WEEE
Datasheet for 4x4 XGA & (B) Audio Matrix Switcher with Delayed Switching
1634088 kb
- Other
Standby Switcher
200 kb
- Data Sheet
Switcher
904 kb
- Other
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact TRITECH Communications
close
TRITECH Communications
625 Locust Street, Suite 300
Garden City, NY 11530
USA
(631) 254-4500
www.tritechcomm.com
Contact in regards to this product:
Kramer Electronics USA, Inc.
Model: VP-411DS
Request more information from a dealer near you
close
Request more information from a dealer near you