Single Fiber HDMI 1.3 and bidirectional RS-232 transmitters over multimode fiber optical cable
Series: OPT
Model: HDMI-OPT-TX100
Part #: 91510009
- Single fiber HDMI1.3a and RS-232 extension
- Advanced EDID management
- Pixel Accurate Re-clocking
- Dual output with built-in distribution amplifier
- Up to 1920x1200 or 2048x1080 resolution with 36 bits deep color and embedded audio
HDMI-OPT-series are optical extenders transferring HDMI 1.3 with embedded audio, DVI 1.0, HDCP and bi-directional RS-232 signals over one multimode fiber to a range of up to 2500 meters.
All transmitters feature proprietary Advanced EDID Management with a memory of 100 EDIDs, 50 of which are user programmable. Using the factory, custom or transparent EDID emulation, the user can fix and lock EDID data on the transmitter’s input connector.
Dual output is available on 200 series units through a built-in distribution amplifier. HDMI-OPT-TX200R has a local monitor HDMI output to enable easy monitoring of the outgoing signal, and HDMI-OPT-RX200R has two identical HDMI outputs. Pixel Accurate Reclocking is included in all transmitters and receivers: a Lightware technology to eliminate jitter and skew generated by low quality sources and multiple daisy-chained devices.
Single Fiber Technology makes these units fully HDMI 1.3 and HDCP 1.1 compliant without the need for a second fiber cable or copper connections. To simplify cabling, the bi-directional communication – which is necessary for HDCP handshaking – is performed on the same fiber core that transmits the video signal.
Bi-directional RS-232 extension is available on „R” versions for remote device control over the same fiber core.*
Galvanic isolation between source and display helps avoid ground loops and hum effects. No delay occurs in the signal during optical conversion, the video image is transported without any frame latency. This feature is crucial in 3D applications and systems where audio is processed separately.
There is cross-compatibility between devices in Lightware’s fiber optical product line, it is possible to connect these devices directly to an MX modular matrix router using MX-HDMI-OPT series input or output optical boards.
- Single fiber HDMI1.3a and RS-232 extension
- Advanced EDID management
- Pixel Accurate Re-clocking
- Dual output with built-in distribution amplifier
- Up to 1920x1200 or 2048x1080 resolution with 36 bits deep color and embedded audio
- Extends DVI or HDMI signals over one multimode fiber core
- HDMI to DVI conversion (when using DVI monitor)
- HDCP1.1 compliant
- Zero frame latency, no delay
- No compression
- SC fiber optical connectors
- Cross compatibility with any Lightware fiber device
- Twist and lock DC power plug
- Local monitor buffered loop output at transmitter
- Two identical HDMI outputs at the receiver
- Robust metal housing
- Rack mountable
- Applicable for long distance lossless HDMI or DVI signal transmission, ground loop isolation, professional AV systems, conference rooms
- Fiber Optic Connector Type - SC-SC
- Fiber Optic Signals Supported - HDMI
- Fiber Optic Signals Supported - RS-232
- Warranty - Yes
- Depth: 5.19 in
- Height: 1.02 in
- Optical Loss Budget: 8 dBm (worst case)
- Width: 3.95 in
- Color Depth: 24, 30 or 36 bits (deep color)
- Regulatory Compliance: CE
- Maximum Resolution: 1920x1200 or 2048x1080 pixels
- Data Rate: 2.25 Gbps (per color)
- DC Voltage: 5 Volts
- Fiber: 50/125 SC multimode (preferred), 62.5/125 SC multimode
- EDID Memory: 50 factory preset, 50 user programmable EDIDs
- EDID support: 256-byte extended EDID v1.3
- Warranty (Length/Type): 3 years
- Current Draw: 1 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Transmitter Output OMA: -6.25 dBm (worst case)
- Receiver OMA Sensitivity: -14.25 dBm (worst case)
- Laser Class Specification: Class 3R
TRITECH Communications
625 Locust Street, Suite 300
Garden City, NY 11530
USA
(631) 254-4500
www.tritechcomm.com