Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Studio Quality Mic Preamp w/ Phantom - Terminals & XLR
Series:
Model: FP-MP1
- Professional Studio-Quality Low-Noise Performance
- Switchable Internal Phantom Voltage
- XLR and Terminal Block Connections
- Selectable Input Level Ranges
- Adjustable Gain with Dual-LED VU Metering
Product Info
Tech Specs
Related Products
Documents
Accessories
The FP-MP1 is the ideal choice in most applications requiring a preamp. RDL's exclusive low-noise discrete circuitry produces studio quality low noise performance in an economical preamplifier. The XLR and plug-in terminal block connections make the FP-MP1 perfect for both rack-mounted hardwired installations and remote use with standard audio cables. A front-panel switch permits the installer to direct phantom voltage to the input connectors. This 3-position switch provides 24V, 12V or phantom OFF. A second switch selects the input gain range thereby permitting the connection of standard or high output level microphones.< BR>
- Professional Studio-Quality Low-Noise Performance
- Switchable Internal Phantom Voltage
- XLR and Terminal Block Connections
- Selectable Input Level Ranges
- Adjustable Gain with Dual-LED VU Metering
- Ultra-Compact All Metal Construction
- Convenience of RDL® FLAT-PAKs™
- amplifiers
- Preamplifiers
- Amplifiers
- Rackmountable - Yes
- Input Impedance: 3 k ohms (balanced)
- GAIN (4 ranges): MIN: 19 dB to 38 dB (switch-selectable) LOW: 26 dB to 45 dB (switch-selectable) MED: 36 dB to 55 dB (switch-selectable) HIGH: 46 dB to 65 dB (switch-selectable)
- Headroom: XLR female (input); XLR male (output); 5 position plug-in terminal block (input and output)
- Input Clipping Level: +4 dBu (at MIN gain)
- Headroom: 20 dB (above +4 dBu
- Low-Cut Filter: 80 Hz, 6 dB/Octave (switch-selectable)
- Phantom Voltages: 12 V, 24 V (switch-selectable)
- Phantom Voltage / Buildout Standard: IEC 1938 1996-12
- CMRR: > 60 dB
- Frequency Response: 20 Hz to 20 kHz (+/- 0.2 dB)
- THD + N: < 0.1% (+4 dBu, all gain settings)
- Noise (below +4 dBu): < -70 dB (60 dB gain, 20 Hz to 20 kHz); < -72 dB (60 dB gain, “A-Weighted”); < -80 dB (50 dB gain, 20 Hz to 20 kHz)
- Equivalent Input Noise: < -130 dB (gain + residual noise below +4 dBu)
- connector type: XLR female (input); XLR male (output); 5 position plug-in terminal block (input and output)
- Audio Level Indicators (2): Red LED: Output level > +4 dBu; Green: -10 to +4 dBu (variable intensity)
- Power Requirement: GROUND-REFERENCED, 24 Vdc @ 100 mA
- Height: 1.42 in 3.61 cm
- Width: 3.25 in. 8.26 cm
- overall length: 4.64 in. 11.79 cm
- Depth: 1.42 in
- Width: 4.64 in
- Rackmountable: Yes
EZ-MPA1
- Microphone Preamplifier - Stereo Output with Compressors
EZ-MPA1X
- Microphone Preamplifier, Stereo Output with Compressor
EZ-MPA2
- Dual Microphone Preamplifier - Stereo Output with Compressors
HR-MP2
- Dual Microphone Preamplifier
HR-MP2A
- Dual Microphone Preamplifier
RU-MLA2
- Dual Mic / Line Preamplifier
RU-MLA2T
- Dual Mic/Line Preamplifier
STM-2
- Adjustable Gain Mic Preamp - 35 to 65 dB Gain
STM-3
- High Gain Mic Preamp - 35 to 75 dB Gain
STM-LDA3
- Studio Quality Mic Preamp with phantom - 3 Line Outputs
Datasheet for Studio Quality Mic Preamp w/ Phantom
298854 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact TRITECH Communications
close
TRITECH Communications
625 Locust Street, Suite 300
Garden City, NY 11530
USA
(631) 254-4500
www.tritechcomm.com
Contact in regards to this product:
Radio Design Labs
Model: FP-MP1
Request more information from a dealer near you
close
Request more information from a dealer near you