Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
SPDIF Repeater / Amplifier
Series:
Model: FP-SPR1
- Correct SPDIF Signal Level from Long Line
- Conversion Between SPDIF Connector Types
- BNC, Phono and Optical Inputs
- BNC, Phono and Optical Outputs
- Reshape SPDIF Waveforms
Product Info
Tech Specs
Related Products
Documents
Accessories
The FP-SPR1 is the ideal product for applications requiring either conversion between SPDIF connector types or recovery of low SPDIF signal levels. Power connections are made using either the full-size barrier block terminals or a dc power jack located in one end panel. A second dc power jack is provided on the other end panel for connecting additional FLAT-PAK modules. The FP-SPR1 is a single-channel module featuring three separate inputs. An input is provided in each conventional SPDIF format: BNC, phono and optical. Any one of these inputs may be used. A coaxial input has priority over the optical input. Three output jacks are also provided: BNC, phono and optical. Either of the coaxial jacks may be used and/or the optical output may be connected. It is possible to use only one of the three outputs or use one coaxial and the optical output simultaneously. A front-panel SIGNAL LED illuminates when an input signal of sufficient amplitude is received to produce the correct output from the module.
- Correct SPDIF Signal Level from Long Line
- Conversion Between SPDIF Connector Types
- BNC, Phono and Optical Inputs
- BNC, Phono and Optical Outputs
- Reshape SPDIF Waveforms
- Virtually Jitter-Free Performance
- Convenience of RDL® FLAT-PAKs™
- Height: 1.34 in. 3.40 cm
- Width: 3.25 in. 8.26 cm
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 14 F
- Depth: 2.82 in
- Height: 1.34 in
- Width: 3.25 in
- Shipping Weight: 0.55 lbs
- Inputs (3): 75 ohms BNC coaxial, 75 ohms phono coaxial, optical
- Input Level: 100 mV to 2.5 V p-p (coaxial)
- Outputs (3): 75 ohms BNC coaxial, 75 ohms phono coaxial, optical
- Output Level: 500 mV p-p (coaxial)
- Frequency Range: 28 kHz to 48 kHz
- Indicator (1): Signal present LED
- Jitter: < 200 pS (input signal 200 mV p-p or greater), < 1 nS (input signal 100 mV p-p)
- Power Requirement:
GROUND-REFERENCED, 24 Vdc @ 80 mA
Note: May operate from 12 Vdc in standalone installation
HR-ADC1
- Analog to Digital Audio Converter
Datasheet for SPDIF Repeater / Amplifier
175306 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact TRITECH Communications
close
TRITECH Communications
625 Locust Street, Suite 300
Garden City, NY 11530
USA
(631) 254-4500
www.tritechcomm.com
Contact in regards to this product:
Radio Design Labs
Model: FP-SPR1
Request more information from a dealer near you
close
Request more information from a dealer near you