Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Passive Single-Pair Sender, Twisted Pair Format-A
Series:
Model: TX-TPS6A
- Single +4 dBu Low-Impedance Balanced Audio Input
- Input on Detachable Terminal Block
- Switch Selects which RJ45 Pair (A, B or C) is Fed
- Signal and Power Pair Pass-Through from LOOP IN Jack
- Passive Circuitry Does Not Require Power
Product Info
Tech Specs
Related Products
Documents
Accessories
The TX-TPS6A is a single-pair audio sending module compatible with RDL Format-A twisted pair products. One low-impedance +4 dBu balanced line-level audio source connects to the module using the detachable terminal block. A studio-quality transformer provides isolation between the audio source and the RJ45 OUTPUT. The TX-TPS6A is a single-pair sender, feeding the input signal to the cable pair set on the front-panel switch during installation. This module drives only one cable pair, therefore a LOOP IN RJ45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained to the LOOP IN jack, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The TX-TPS6A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C. The TX-TPS6A is a passive module that does not require power to operate. If power is present on a cable connected to the LOOP IN jack, that power is passed through to the modules connected to the OUTPUT jack.
- Single +4 dBu Low-Impedance Balanced Audio Input
- Input on Detachable Terminal Block
- Switch Selects which RJ45 Pair (A, B or C) is Fed
- Signal and Power Pair Pass-Through from LOOP IN Jack
- Passive Circuitry Does Not Require Power
- Galvanic Isolation through a Studio-Quality Transformer
- Daisy-Chain with Single-Pair or Two-Pair Format-A Senders
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Total Harmonic Distortion + Noise (THD+N): 0.04 %
- Depth: 2.09 in
- Height: 1.60 in
- Width: 3 in
- Inputs: Low-impedance Balanced; Recommended source impedance < 150 ohm
- Overall Length: Detachable Terminal Block (Balanced)
- Input Level +4 dBu balanced;: +22 dBu Max
- Format-A Signal Pair Used: Switch-selectable A, B, or C
- Format-A Input: RJ45 LOOP IN
- Outputs: RDL TP Format-A
- Output Connection: RJ45
- Frequency Response: 20 to 20000 Hz (+/- 0.1 dB)
- Headroom above +4 dBu: > 18 dB
- CMRR: > 85 dB (50 Hz to 150 Hz)
- Power Requirement: Passive
D-BT1A
- Wall-mounted Bluetooth Audio Format-A Interface
D-TPR1A
- Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output
D-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo phono outputs
D-TPS1A
- Active Single Pair Sender Twisted Pair Format-A XLR Microphone Input with Phantom
D-TPS2A
- Active Two Pair Sender Twisted Pair Format-A Stereo RCA Jack Inputs
D-TPS2AM
- Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone $amp; Stereo Mini-jack In
D-TPSM2A
- 2-pair Audio Sending Module, White
DB-TPS2AM
- Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone $amp; Stereo Mini-jack In
DB-TPS3A
- DB-TPS3A
Active Three-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo RCA inputs
DB-TPSM2A
- 2-pair Audio Sending Module, Black
DS-BT1A
- LED Status Indication Wall-mounted Bluetooth Audio Format-A Interface
DS-TPR1A
- Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR mic/line output
DS-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo phono out
DS-TPS1A
- Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR mic input w phantom
DS-TPS2A
- Active Two-Pair Sender - Twisted Pair Format-A - Stainless - stereo phono jack inputs
DS-TPS2AM
- Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone & Stereo Mini-jack In
DS-TPSM2A
- 2-pair Audio Sending Module, Stainless Steel
FP-TP4PW
- Power Inserter - Twisted Pair - Four Sets of Outputs - Signal Loop-through
FP-TPX3A
- Format-A Twisted Pair Remote Controlled Mixer
RU-BNF
- Format-A Bi-directional Network Interface
RU-BNFP
- Format-A Bi-directional Network Interface with PoE
RU-FN
- Format-A to Network Interface
RU-TP4PW
- Power Inserter - Twisted Pair - four sets of outputs - signal loop-through
RU-TPDA
- Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs
RU-TPS4A
- Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs
TX-TPR1A
- Active Single-Pair Receiver
TX-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs
TX-TPR6A
- Passive Single-Pair Receiver, Twisted Pair Format-A
TX-TPS1A
- Active Single-Pair Sender, Twisted Pair Format-A
TX-TPS3A
- Active Three-Pair Sender, Twisted Pair Format-A
Datasheet for Passive Single-Pair Sender - Twisted Pair Format-A
215248 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact TRITECH Communications
close
TRITECH Communications
625 Locust Street, Suite 300
Garden City, NY 11530
USA
(631) 254-4500
www.tritechcomm.com
Contact in regards to this product:
Radio Design Labs
Model: TX-TPS6A
Request more information from a dealer near you
close
Request more information from a dealer near you