RC4-1BC™ for Crestron 1Beyond

Model: RC4-1BC

Extends power (no factory camera PSU required), PTZ control, IR & video over CAT5e/CAT6 cable between 10m-100m.
Supports cameras with HDMI video and RS232 serial control.
Simple Plug and Play installation, no programming required.
Allows pass-through of manufacturer firmware updates from codec to camera.
All hardware-specific camera and codec connection cables included.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The RC4-1BC™ camera extension kit has been designed to deliver a transparent, reliable, and cost-effective link between a generic codec/Head-End device and Crestron 1Beyond IV-CAMPTZ-12 and IV-CAMPTZ-20 cameras.

Sound Control Technologies (SCT) Camera Extension Kits are designed to streamline the installation of digital video PTZ camera systems. By simplifying complex cabling and extending traditional distance limitations up to 100m, SCT’s extension kits provide integrators with cost and time saving solutions.

Extends power (no factory camera PSU required), PTZ control, IR & video over CAT5e/CAT6 cable between 10m-100m.
Supports cameras with HDMI video and RS232 serial control.
Simple Plug and Play installation, no programming required.
Allows pass-through of manufacturer firmware updates from codec to camera.
All hardware-specific camera and codec connection cables included.
PowerSniffer included for testing SCTLink™ cable conductor continuity.
Integrator only required to provide CAT5e/CAT6 SCTLink™ Cable.
Base Kit: Inclusive of RC4 Modules, Kit Cables and Power Supply:
RC4-CE Camera Module
RCC-C001-0.3M HDMI to HDMI Camera Cable
PPC-022-0.3M RJ11 to 5.5 x 2.1 Power Cable
RCC-C005-0.3M RJ45 to 8pin din Control Cable (Power Connector Unused)
RC4-HE Head-End/Codec Module
RCC-H001-1.0M HDMI Head-End Cable
RCC-H010-2.0M HDMI DB9 FM to DB9 FM Head-End Cable
WPS-12 Power Supply

ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Certifications: UL, CE, FCC, CCC, TÜV, RCM+GEMS, LPS, BIS, PSE, CB, DoE VI, CoC V5 and RoHS2
Color: Black
Warranty (Length/Type): 3 Years
Video Format: HDMI, up to 1920x1080p at 60Hz with HDCP support
VISCA Loop Connector (RC4-HE™): 8-Pin Mini DIN Female
VISCA Loop Connector (RC4-CE™): RJ11 Female for Data or Power
Power/Control/IR Connector (RC4-CE™): RJ45 Female
VISCA Control Loop: Daisy Chain Configuration with up to 7 cameras
RS232 Connector (RC4-HE™): 9-Pin D-Sub Male
Modulated IR Output Connector (RC4-HE™): 3.5mm Mono Jack for IR Emitter
SCTLINK™ CABLE SPECS: SCT recommends CAT6 or better cable for the SCTLink™. The use of a shielded cable, while not required for most platforms, is highly recommended. Proper termination and testing, along with good cable management, minimizes potential problems. Wiring Termination Standard T568A or T568B 10m Minimum - 100m Maximum Length Power Consumption A linked kit will consume 7.5W, plus the power consumption of the attached camera
Cameras: Atlona, Avaya, AVer, Cisco, ClearOne, Lifesize, Lumens, Marshall, Minrray, Panasonic, Poly, PTZ Optics, Sony, Starleaf, VDO360 and VHD
RC4-CE™ Camera End Module: Dimension: H: 0.93 x W: 2.5 x D: 3.741 inch, Weight: 0.33 lbs/150g
RC4-HE™ Head End Module: Dimension: H: 1.504 x W: 3.813 x D: 3.617 inch, Weight: 0.52 lbs/237g
WPS-12™ Power Supply (Included): Dimension: H: 1.19 x W: 1.85 x D: 4.65 inch; Weight: 0.5 lbs/236g; Input: 100 to 240VAC, 47-63Hz, 1.45A Max; Output: 30VDC, 2A Max; Output Connector: 5.5mm x 2.5mm DC Barrel

Kit 512574 kb - Data Sheet

Project List