Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
The Ultimate in Tape Replacement
Series: Ki Pro Family
Model: Ki Pro Rack
Part #: KI-PRO-RACK-R0
- Transition to file-based workflows
- 10-bit, full raster recording
- RS-422 Control
- Familiar controls and operation
- Professional connections
Product Info
Tech Specs
Documents
The power of Ki Pro in a 1RU format, the perfect fit for broadcasters transitioning away from tape.
- Transition to file-based workflows
- 10-bit, full raster recording
- RS-422 Control
- Familiar controls and operation
- Professional connections
- Dual media drives
- Ethernet file transfer
- Integrated AJA hardware conversion
- Remote configuration and control
- Video Input: •Digital: 1 Channel, selectable input SD and HD-SDI (2xBNC), SMPTE-259/292/296 HDMI •Analog: SD/HD Component (3xBNCS): SMPTE/EBU N10, Betacam 525 line, Betacam 525J, YPbPr 12-bit A/D, 2x oversampling
- Video Output (all simultaneously active): •Digital: SD and HD-SDI, SMPTE-259/292/296 (1xBNC) HDMI •Analog: Composite (1xBNC): NTSC, NTSCJ, PAL 12-bit D/A, 8x oversampling SD/HD Component (3xBNCs): SD: SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB 12-bit D/A, 8x oversampling HD: YPbPr, RGB 12-bit D/A, 2x oversampling
- Audio Input: •Digital: AES 24-bit, 8 channel, 48kHz (4xBNC) 24-bit SDI embedded audio, 8 channel, 48kHz HDMI embedded, 2 channel •Analog: 24-bit A/D, 2 channel balanced (2 XLR), 48kHz Input level: Line
- Audio Output: •Digital: AES 24-bit, 8 channel, 48kHz (4xBNC) 24-bit SDI embedded audio, 8 channel, 48kHz HDMI embedded, 2 channel •Analog: 24-bit D/A, 2 channel balanced XLR, 48kHz
- Network: •10/100/1000 Ethernet (RJ45) •Embedded webserver for remote control
- Panel User Interface: •2 x 20 character display, with dedicated buttons
- Timecode: •LTC timecode input and output via BNC •SDI embedded RP188 timecode •On-screen timecode display on SDI 2 output
- Serial Port: •RS-422 (slave pinout), 9-pin (available beginning with version 2.0 firmware)‚ Connector pinout is as follows: 1 GND 2 TX - 3 RX + 4 GND 5 No Connection 6 GND 7 TX + 8 RX - 9 GND Shell GND
- Hardware up conversion - 10-bit: •Anamorphic: full-screen •Pillar box 4:3: results in a 4:3 image in center of screen with black sidebars •Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars •Zoom Letterbox: image zoomed to fill screen •Zoom Wide: combination of zoom and horizontal stretch to fill 16:9 screen; this setting can introduce a small aspect ratio change
- Hardware down conversion - 10-bit: •Anamorphic: full-screen •Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved •Crop: image is cropped to fit new screen size
- Hardware cross conversion - 10-bit: •1080i to 720P •720P to 1080i
- Storage Module drive bays: •2 (each with eject button and select LED)
- Physical: •Height: 1.75" (4.45cm) •Width: 19" (48.26cm) •Depth: 12.5" front panel to the back of the deepest connector (37.75cm)
- Temperature: •Operating Temperature Range: 5C to 40C •Safe Storage Temperature Range (power OFF): -20C to 60C
- Power: •Voltage: 100-240 VAC •Typical operating power: 40W
Ki pro family brochure
10442 kb
- Brochure
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact TRITECH Communications
close
TRITECH Communications
625 Locust Street, Suite 300
Garden City, NY 11530
USA
(631) 254-4500
www.tritechcomm.com
Contact in regards to this product:
AJA Video
Model: Ki Pro Rack
Request more information from a dealer near you
close
Request more information from a dealer near you