Control Panels & Interfaces : Remote Controls : Ashly Audio, Inc. - RD-8C

Remote Fader Level Control, Desktop-mount

Model: RD-8C

On/Off switch with LED for each fader
Adjusts levels on single or combined input or output channels
Wire directly to host unit, no network required
Shipping weight: 2lbs (1kg)
Safety/compliance: CE, FCC, RoHS

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The RD-8C is a remote fader level control. Control your system from any location with our remote controls. RD-8C is a hard-wired desktop programmable remote fader controller for Ashly amps and processors that have DSP and a serial data connector. RW-8C is the wall-mount version. Using Protea NE Software, each fader is assigned to adjust the level of one or more input or output channels. A master fader controls the overall level of all faders.

On/Off switch with LED for each fader
Adjusts levels on single or combined input or output channels
Wire directly to host unit, no network required
Shipping weight: 2lbs (1kg)
Safety/compliance: CE, FCC, RoHS
Include:
- nXp amplifiers
- Pema amplifiers
- NE multi-channel amplifiers
- NE two-channel amplifiers
- ne24.24M matrix processor
- NE8800/4800/4400 network processors

Systems Controlled - Audio
Warranty - Yes
Spec Sheet available - Yes

Max Data Cable Length: Up to 1000 ft using #24 gauge twisted pair
Connections: XLR male
Fader range: +10 to -75 dB
Power Requirements: Phantom Power from host unit
Warranty (Length/Type): 5 Years Limited
Depth: 1.60 in
Height: 3.40 in
Width: 7.30 in
Shipping Weight: 2 lbs
Product Weight: 1.40 lbs
Certifications: CE, FCC
Operating Temperature (Maximum): 120.20 F
Operating Temperature (Minimum): 39.20 F

ne24.24M - 24-channel Matrix Digital Signal Processor

ne4400 - 4 x 4 32-bit Network Digital Signal Processor

ne4800 - 4 x 8 32-bit Network Digital Signal Processor

ne8800 - 8 x 8 32-bit Network Digital Signal Processor

nXp1.52 - Network Power Amplifier with DSP: 2 x 1,500 Watts @ 2 Ohms 2 x 1,500 Watts @ 4 Ohms 2 x 1,500 Watts @ 70V

nXp1.54 - Network Power Amplifier with DSP: 4 x 1,500 Watts @ 2 Ohms 4 x 1,500 Watts @ 4 Ohms 4 x 1,500 Watts @ 70V

nXp3.02 - Network Power Amplifier with DSP: 2 x 3,000 Watts @ 2 Ohms 2 x 2,000 Watts @ 4 Ohms 2 x 2,450 Watts @ 70V

nXp3.04 - Network Power Amplifier with DSP: 4 x 3,000 Watts @ 2 Ohms 4 x 2,000 Watts @ 4 Ohms 4 x 2,450 Watts @ 70V

nXp4002 - Network Power Amplifier with DSP: 2 x 400 Watts @ 2 Ohms 2 x 400 Watts @ 4 Ohms 2 x 400 Watts @ 70V

nXp4004 - Network Power Amplifier with DSP: 4 x 400 Watts @ 2 Ohms 4 x 400 Watts @ 4 Ohms 4 x 400 Watts @ 70V

nXp8002 - Network Power Amplifier with DSP: 2 x 800 Watts @ 2 Ohms 2 x 800 Watts @ 4 Ohms 2 x 800 Watts @ 70V

nXp8004 - Network Power Amplifier with DSP: 4 x 800 Watts @ 2 Ohms 4 x 800 Watts @ 4 Ohms 4 x 800 Watts @ 70V

Control 587 kb - Data Sheet

Project List

Suggested Products

Crestron 1 Beyond IR Camera Remote

by Crestron Electronics, Inc.

Horizon™ In-Wall Multiway Remote, Black

by Crestron Electronics, Inc.

Tesira TEC-1i - PoE In-wall Mount Remote Control

by Biamp