Fiber Optical DisplayPort Extender with KVM
Series: OPT
Model: DP-OPT-RX150
Part #: 91510019
- Supports DisplayPort Link Training
- HDCP 1.4 compliant
- No signal latency, zero frame delay
- 2560x1600 maximum resolution (DP)
- Compatible with Apple LED Cinema Display
DP-OPT-RX150 extends Dual-mode DisplayPort 1.1a high resolution video and embedded audio with optional HDCP encryption plus USB HID over one multimode fiber up to 1100m.
DisplayPort one of the newest video interface standards. Using DisplayPort, high resolution video and excellent quality audio can be transmitted. The interface's 10.8 Gbps bandwidth is capable of transmitting 2560x1600 at 60Hz pixel resolution video with full support of content protection (HDCP). UHD and 4Kx2K resolution can be achieved up to 30Hz frame rate.
Intelligent HID Emulation is provided for two devices with full transparency. The special HID devices - including keyboard and mouse - are emulated by the extender and transparently transferred to the computer with the result that no drivers are required for the proper functionality, it’s as easy as Plug and Play. DP-OPT-TX150 has 2 extra local USB ports with a built-in HUB and can be connected to the PC/Mac with a single USB cable.
Dual-mode DisplayPort: when connecting a DVI or HDMI display through an adaptor cable, Dual-mode DisplayPort graphic cards reconfigure their outputs to DVI or HDMI accordingly. Lightware DisplayPort extenders support Dual-mode port extension and adaptor cables.
Thunderbolt: Lightware’s DisplayPort extenders can be used with Thunderbolt sources and devices. The extender pair and the DisplayPort monitor have to be placed at the end of the Thunderbolt chain. Apple Thunderbolt Display is not supported.
Single Fiber Technology makes these units fully DisplayPort 1.1a and HDCP 1.1 compliant without the need of a second fiber cable or copper connections. To simplify cabling, the bi-directional communication - necessary for DisplayPort Link Training, HDCP handshaking and USB transfer - is performed on the same fiber core that transmits the video signal. Both receiver and transmitter are remote configurable from either side through the mini USB connector.
- Supports DisplayPort Link Training
- HDCP 1.4 compliant
- No signal latency, zero frame delay
- 2560x1600 maximum resolution (DP)
- Compatible with Apple LED Cinema Display
- Extends DP 1.1 and USB KVM signals over one multimode fiber cable
- Single Fiber Technology
- USB KVM (HID) extension
- Firmware upgrade through USB
- Extension distance up to 2500 meters (with OM3 fiber, 1920x1080p60)
- Supports external USB hubs
- Dual-mode DP: supports DVI and HDMI adaptors
- Transparent EDID pass-through
- Intuitive control software for device configuration
- Device control via USB
- Uncompressed video up to 10.8 Gbps datarate (DP1.1)
- No video compression
- Status LEDs (fiber link, source, signal type and monitor detect)
- Compatible with Mac laptop and desktop computers with Thunderbolt port
- Kensington lock support
- External universal power adaptor
- Mounting options for rack, furniture or truss
- Solid machined aluminum body
- Applications:
- Long distance lossless DisplayPort signal and USB HID transmission
- Apple Cinema Display compatible AV extension
- Ground loop isolation
- Extender Type - DisplayPort
- Extender Type - KVM
- Warranty - Yes
- Spec Sheet available - Yes
- Transmission Range: 3608.92 ft
- Certifications: CE
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 3.25 Watt
- Current Draw: 2 Amps
- DC Voltage: 5 Volts
- Peak Power: 3.50 Watt
- Depth: 3.74 in
- Height: 0.71 in
- Width: 4.33 in
- Product Weight: 0.66 lbs
- Warranty (Length/Type): 3 Years
TRITECH Communications
625 Locust Street, Suite 300
Garden City, NY 11530
USA
(631) 254-4500
www.tritechcomm.com