Multimode Fiber cable extenders supporting DVI signals
Model: DVI-OPT-TX220-Pro
Part #: 91510003
- Extends DVI-D signals with Single Fiber Technology
- 1920x1200 or 2048x1080 maximal resolutions
- Cross compatibility with any Lightware Fiber device
- Zero frame latency - No delay
- No compression
Using Single Fiber Technology the DVI-D signal is transmitted over only one multimode 50/125 fiber core. Sources and display devices are galvanically isolated against ground loops and hum effects, and no delay occurs in the signal, the video image is transported without any frame latency. The Neutrik OpticalCON fiber connectors ensure reliable operation in professional environments. These connectors are rugged, dust proof and very reliable, compatible with standard LC connectors. Cross compatibility between Lightware fiber products is ensured thanks to our attentive design. In a standalone application DVI-OPT-TX220-Pro and DVI-OPT-RX220-Pro can work together simply, but with Lightware hybrid modular matrix concept, it is even possible to connect these extender boxes directly to the matrix router using an MX-DVI-OPT series input or output board. Devices can be mounted several ways, depending on the application. Rack shelf and mounting bracket is available which offers easy mounting on truss systems with standard clamps or using the unit built in to furniture. The receiver power source can be switched to use the built-in local AC power supply, or to receive power remotely from the transmitter through special hybrid fiber-copper cable (Neutrik 2M-4S75 only).
- Extends DVI-D signals with Single Fiber Technology
- 1920x1200 or 2048x1080 maximal resolutions
- Cross compatibility with any Lightware Fiber device
- Zero frame latency - No delay
- No compression
- Neutrik OpticalCON fiber connectors
- Breakout LC connector for Neutrik B channel
- Advanced EDID Management through front panel LCD menu or
- Serial port
- Improved DVI signal detection circuit
- Firmware upgrade through serial port
- Status LEDs: Source detection, monitor detection, laser loss detection
- Local monitor buffered loop output at transmitter
- Pixel Accurate Reclocking
- Two identical DVI-D outputs at receiver
- Alarm output for fiber and DVI link loss
- Built in universal power supply
- Remote power option for receiver (only when using Neutrik
- 2M-4S75 hybrid fiber cable with 2 fibers + 4 copper wires)
- Metal housing for professional use
- Improved ESD protection
- Rack, truss or furniture mounting accessories
- Fiber Optic Connector Type - SC-SC
- Warranty - Yes
- Data Rate: 1.65 Gbps per color
- Max Resolution: 640x480 to 1920x1200 pixels
- EDID Memory: 50 factory preset, 50 user programmable EDID in transmitter
- EDID support: 256 Byte Extended EDID v1.3
- Fiber: 50/125 SC Multimode
- Laser Wavelengths: 850 Nm
- Laser Class Specification: Class 3
- Transmitter Output: -6.25 dBm
- Optical Loss Budget: 8 dB
- Power Supply: 100 to 240 Vac, 50 to 60Hz, 5Vdc, 2A (Internal)
- Power consumption (TTX220): 3.5 W
- Enclosure: 1U half rack, 1 mm metal
- Regulatory Compliance: CE
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Depth: 7.13 in
- Height: 1.66 in
- Width: 8.70 in
- Shipping Weight: 3.13 lbs
- Warranty (Length/Type): 3 Years
TRITECH Communications
625 Locust Street, Suite 300
Garden City, NY 11530
USA
(631) 254-4500
www.tritechcomm.com