Universal Two-Input TPS (HDBaseTTM) Transmitter with Event Manager Room Control
Model: FP-UMX-TPS-TX120-MKS
Part #: 91540099
- Built-in Event Manager control automation feature
- Autoselect modes to automatically switch video and audio (first detect, last detect, priority)
- Breakaway audio and video switching (audio and video signals can be routed separately)
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- 1920x1080 at 120Hz/4:4:4, 4096x2160 at 30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
FP-UMX-TPS-TX120-MKS is a floor panel with HDMI and VGA input ports, transmitting signals at a resolution of up to 4K together with audio and control up to a range of 170 m over a single CAT5 or better class cable.
This transmitter was designed for digital and analog video and audio signals:VGA YprPb and HDMI 1.4 with analog stereo audio from local input or embedded 7.1 HBR audio and also handles HDCP encryption. Analog signals (both audio and video) are converted to a digital format and can be transmitted separately.
Using the factory, custom or transparent EDID emulation, the user can fix and lock EDID data on each input connector. Advanced EDID Management forces the required resolution from any video source and fixes the output format conforming to the system requirements.
The unit offers bi-directional and transparent IR, RS-232 and Ethernet transmission. IR and RS-232 connections support command injection, allowing the sending of any IR or RS-232 control command directly via the LAN connection.
Remote powering is available through the single CAT cable, but local power supply can also be used. The device can be mounted on a rack shelf or used standalone. The device is compatible with both HDBaseTTM extenders and matrix boards.
- Built-in Event Manager control automation feature
- Autoselect modes to automatically switch video and audio (first detect, last detect, priority)
- Breakaway audio and video switching (audio and video signals can be routed separately)
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- 1920x1080 at 120Hz/4:4:4, 4096x2160 at 30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- HDCP enable/disable function on input
- HDCP 1.4 compliant
- Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
- No signal latency, zero frame delay
- Bi-directional RS-232 and single direction IR extension (pass-through and control)
- TPS link quality and cable length monitoring
- DVI-I (Analog+Digital) input connection
- Adjustable analog audio settings (volume, gain, balance)
- Extends VGA, DVI or HDMI 1.4 + Audio + Ethernet + RS-232 + IR over one CAT5/6/7 cable
- Audio embedding (or replace original audio)
- Can be remote powered through CATx cable (PoE PD)
- Firmware upgrade through Ethernet
- Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
- Phoenix 2-pol DC power connector
- Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
- Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
- HDBaseT compatible
- Ethernet extension (100 Mbps)
- Advanced EDID Management
- Digitizes VGA, YUV analog input formats and converts to HDMI or DVI
- Pixel Accurate Reclocking
- Command injection on RS-232 and IR ports
- Device control via Ethernet (TCP/IP) and RS-232
- Multiple TCP/IP connections
- Intuitive control software for device configuration
- Front panel buttons for crosspoint control
- Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
- No video compression
- Built-in video test pattern generator
- Bi-directional RS-232 and IR extension (pass-through)
- Frame Detector (analyze detailed video timings)
- Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
- Compatible with Mac laptop and desktop computers with Thunderbolt port
- 3,5mm audio jack input
- Active fan cooling
- Warranty - Yes
- Spec Sheet available - Yes
- Warranty (Length/Type): 3 Years
- Certifications: CE
- Active Power: 8.50 Watt
- Current Draw: 0.25 Amps
- DC Voltage: 48 Volts
- Resolution: Up to 4K UHD 3840×2160 at 30Hz, 1600x1200 at 60Hz, FullHD 1920x1080 at 60Hz
- Digital Audio Formats: Supports up to 8 channel PCM, Dolby TrueHD and DTS-HD Master Audio 7.1 formats
- Input Cable Equalization: Automatic max 20 m
- EDID emulation: Yes, Advanced EDID Management
- EDID Memory: 119 factory preset, 15 user programmable
- VGA to digital conversion: 0 microseconds delay
- HDCP pass-through: Yes
- RS-232 pass-through: Yes, configurable
- RS-232 (control option): 4800, 9600, 19200, 38400, 57600, 115200 Baud Rx,Tx (local or through CATx)(default: 57600)
- Local Power: 2-pole, DC 48V 500mA
- Digital Video Input: HDMI connector
- Analog Video Input: VGA connector
- Audio Input: 3.5 mm stereo jack
- Ethernet: 1 x RJ45
- Control: IR
- TPS output: 1 x RJ45
- Serial Port: 3-pole PHOENIX
- Power: 2-pole PHOENIX
- Volume: -96 .. 0 dB
- Balance: 0 .. 100%
TRITECH Communications
625 Locust Street, Suite 300
Garden City, NY 11530
USA
(631) 254-4500
www.tritechcomm.com