Signal Processing Systems : Preamplifiers : Lowell Manufacturing Co. - MIX2

Mixer Pre-amplifier, 7 Channels, Rackmount Kit

Model: MIX2

Mute switch allows Channel 1 (MIC or AUX input) to mute all other channels, or Channels 1-6 to mute Channel 7 (AUX only) input
Post-master volume control outputs: Balanced line level output at Phoenix connector, Balanced MIC level output at Phoenix connector, Unbalanced main output at dual parallel RCA jacks
Pre-master volume control tape output at dual parallel RCA jacks
Low cut filter switch can reduce bass response in reverberant spaces (like gyms) and act as a horn protection filter (trumpet protection) when paging horns are used
Includes rack mounting brackets

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The MIX2 mixer/pre-amplifier features six channels, each with a microphone input at a removable Phoenix connector, and an AUX input at an RCA jack. A seventh channel (AUX only) has a front panel switch to select one of two rear panel AUX input jacks.

Mute switch allows Channel 1 (MIC or AUX input) to mute all other channels, or Channels 1-6 to mute Channel 7 (AUX only) input
Post-master volume control outputs: Balanced line level output at Phoenix connector, Balanced MIC level output at Phoenix connector, Unbalanced main output at dual parallel RCA jacks
Pre-master volume control tape output at dual parallel RCA jacks
Low cut filter switch can reduce bass response in reverberant spaces (like gyms) and act as a horn protection filter (trumpet protection) when paging horns are used
Includes rack mounting brackets

Spec Sheet available - Yes

Input Channels 1-6: Microphone Inputs – balanced Phoenix connectors: 1mV (to reach 0dB 775mV output), 600 ohms AUX Inputs – unbalanced RCA connectors: 140mV (to reach 0dB 775mV output), 24kohms
Input Channel 7: AUX Inputs – Switchable on front panel – RCA jack "A" or RCA jack "B" 100mV (to reach 0dB 775mV output), 28kohms
Outputs: Main Output – Unbalanced parallel RCA jacks 775mV, 280ohms; Line Output – Balanced 775mV, 600 ohms and MIC Output – 7mV, 50 ohms both on removable Phoenix connector; Tape Output – Unbalanced parallel RCA jacks 75mV, 280ohms
Frequency Response: 20Hz–20kHz ±1dB
Signal to noise ratio: MIC 60dB AUX 65dB (from 0dB output level), Total Harmonic Distorion: <=.05%
AC Voltage (Maximum): 230 Volts
AC Voltage (Minimum): 115 Volts
Active Power: 5 Watt
Depth: 9.88 in
Height: 1.80 in
Width: 19 in
Product Weight: 7 lbs
Shipping Weight: 12.35 lbs
Color: Black

1849-MIX2_1.pdf 331047 kb - Data Sheet

Project List

Suggested Products

DM NAX 4-Zone Streaming Preamplifier

by Crestron Electronics, Inc.

MusicCast Wireless Streaming Preamplifier

by Yamaha Corporation

8-channel Microphone Preamplifier

by Yamaha Corporation