Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2 Channel Amplifier for High Efficiency Professional Applications
Model: K20
- Advanced switch-mode worldwide operating power supply technology for high performance and compact size
- Power Factor Correction PFC for extremely low mains consumption and extremely wide mains operating range
- Variable speed fan for low noise
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- XLR female / 6.3mm Jack Neutrik style input connectors with link capability
Product Info
Tech Specs
The K20 is the masterpiece of the flagship K Series. In addition to headroom in abundance even for the power-hungriest woofers, the most powerful member of the K Series comes preloaded with all options, making the K20 the ultimate powerhouse in every single aspect, yet packing it all into a single 19” rack unit weighing as little as 12 kg/26.5lb. Possible only due to remarkably high efficiency exceeding 85%, the enormous power density paired with unique Powersoft technologies warrants top performance despite running off a single mains phase. Like all K Series models, the K20 is designed for, and absolutely stable with, 2 ohm loads, further reducing the number of amps required to power a specific system.
- Advanced switch-mode worldwide operating power supply technology for high performance and compact size
- Power Factor Correction PFC for extremely low mains consumption and extremely wide mains operating range
- Variable speed fan for low noise
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- XLR female / 6.3mm Jack Neutrik style input connectors with link capability
- Built-in defeatable Clip limiters for each channel
- LCD matrix interactive display
- Digital gain-attenuator control
- User selectable maximum output power for each channel
- User selectable maximum mains current draw
- Comprehensive-user friendly front panel display menu
- Fully protected circuitry design including DC, infrasonic, high frequency, thermal overload and short circuit
- Temperature forecast with LCD traced historical behaviour
- Downloadable log file of functional fault events with time related trace
- Load impedance measurement / display for each channel
- Output power measurements / display for each channel
- Mains voltage and current measurements / display
- Defeatable gate selection for each channel
- Gain/sensitivity user selection capability
- Hardware monitor available for fast local diagnostic
- Fixed frequency switchmode output stage for high grade sound accuracy
- Compact size - all models only 1 RU for reduced rack cost and space
- Light weight - for easier racking and shipping: 8 Kg / 17.6 lbs for K3 and K2, 12 Kg / 26.5 lbs for K20, K10, K8, and K6
- Built in Remote Control ( RS 485 interface ) for full diagnostic, operational setting and system monitoring
- Smart Card settings , parameters and upgrades functionality
- Lockable set-up by user selectable access key code
- DSP option capability
- Ethernet option capability
- Full remote control and monitoring via Armonía Pro Audio Suite™ software
- Interface available for MediaMatrix, Crestron, AMX, and Q-Sys control and monitoring systems
- Amplifier Signal Type - Audio
- Amplifier Type - Power Amplifier
- Warranty - Yes
- Controls: 4 pushbuttons, function depending on user menu
- Depth: 18.70 in
- Height: 1.75 in
- Impedance: 100 ohm
- Indicators: 7 meter LEDs: 5 x green, 1 x yellow, 1 x red, top yellow and red show alarm with protect description on LCD panel
- Memory: 8 MB (RAM) plus 2 MB (flash for presets)
- Width: 19 in
- Slew Rate: 50 V/micros @ 8 ohms, input filter bypassed
- AC Voltage: 300 Volts
- Chassis: 1 mm / 0.04” steel chassis and removable dust cover ; 3 mm / 0.12” steel front panel, screw hole protection, side reinforcement & rear support
- Power Switch: Mains switch
- Maintenance: SmartCard reader/writer for firmware updates and preset storage. Easily accessible dust filter foam behind two steel covers
- AC Mains: AMP CPC 45A on rear panel; AMP CPC 45A connector mounted on a 3 x 5mm2 (10AWG) cable
- Warranty (Length/Type): 4 year
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Signal to Noise Ratio: 106 dB
- Operating Temperature (Maximum): 85 F
- Operating Temperature (Minimum): 75 F
- Current Draw: 45 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Crosstalk separation: > 66 dB @ 1 kHz
- THD+N/SMPTE IMD/DIM 100 IMD: <0.5% from 1 W to full power (typically <0.05%)
- Audio signal input connectors: Analog: 2 x balanced Neutrik® Combo XLR female/1/4” jack
- Loudspeaker output connectors: 2 x Neutrik® Speakon NL4MD
- Aux voltage: 1 x 2-pin Phoenix P. 3.81mm
- Damping factor @ 8 ohms: >5000 @ 20-200 Hz
- 2-Channel mode(4ohm): 2x5200 W
- 2-Channel mode(8ohm): 2x2700 W
- 2-Channel mode(2ohm): 2x9000 W
- Mono-Bridge mode(4ohm): 1x18000 W
- Mono-Bridge mode(8ohm): 1x10400 W
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact TRITECH Communications
close
TRITECH Communications
625 Locust Street, Suite 300
Garden City, NY 11530
USA
(631) 254-4500
www.tritechcomm.com
Contact in regards to this product:
Powersoft Advanced Technologies Corp
Model: K20
Request more information from a dealer near you
close
Request more information from a dealer near you