Audio Production Equipment : Audio Mixers / Consoles : RDL, Radio Design Labs - EZ-MXA20

20 Watt Stereo Audio Mixer Amplifier with EQ

Series:

Model: EZ-MXA20

Audio Amplifier with Mic and Line Input Mixer
10 Watts RMS Per Channel into 8 Ω
8 Watts RMS Per Channel into 4 Ω
Switch-Selectable Load Impedance on Rear Panel
Balanced Microphone Input on XLR

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The EZ-MXA20 is a stereo mixer amplifier with one mic input and two line inputs. Bass and treble tone controls are included. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. The EZ-MXA20 is used in houses of worship, restaurants, clubs, meeting rooms and commercial sound systems.

Audio Amplifier with Mic and Line Input Mixer
10 Watts RMS Per Channel into 8 Ω
8 Watts RMS Per Channel into 4 Ω
Switch-Selectable Load Impedance on Rear Panel
Balanced Microphone Input on XLR
Unbalanced Line Inputs on RCA Jacks
Switch-Selectable Phantom on Mic Input
Bass and Treble Tone Control Equalization
Integral Overload Limiter with LED Indicator
Limiter Controls Overloads from Clipping
Limiter Produces Output Level Comparable to Higher Power Amp

Inputs (3):: 1.2 kΩ balanced on XLR jack, mic-level, -55 dBu Min. (for 10 W out), -11 dBu max.(1) > 10 kΩ, -10 dBV nominal on RCA jacks, -13 dBV Min. (for 10 W out), +22 dBV max. (2)
Gain:: Off to 74 dB (mic), Off to 32 dB (line)
Outputs (2):: Left and Right, 10 Watts RMS into 8 Ω per channel or 8 Watts RMS into 4 Ω per channel, switch-selectable output impedance
Equalization:: ±10 dB @ 10 kHz, ±9 dB @ 80 Hz
Frequency Response: 50 Hz to 20 kHz (±1.5 dB, mic input, 10 Watts), 35 Hz to 20 kHz (±1.5 dB, line input, 10 Watts)
THD+N:: < 0.25%
CMRR:: > -55 dB (mic)
Crosstalk:: < -68 dB (1 kHz, line input)
Phantom:: Switch-selectable 24 V (IEC 1938: 1996-12)
Noise:: < -70 dB (below 10 Watts, -10 dBV line input), < -65 dB (below 10 Watts, -50 dBu mic input)
24 Vdc power supply current:: 170 mA (idle), 1000 mA (max.)
Case dimensions:: 5.75” (14.6 cm)W x 5” (12.7 cm)D
Mounting size:: 1/3 rack width
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 50 Hz
Minimum Frequency Response (Bandwidth): 0.05 kHz
Number of Inputs: 3
Number of Outputs: 2
Total Harmonic Distortion + Noise (THD+N): 0.25 %
DC Voltage: 24 Volts
Depth: 5 in
Width: 5.75 in
Shipping Weight: 1.40 lbs

EZ-PA20 - 20 Watt Stereo Audio Power Amplifier

EZ-PA20X - 20W Stereo Power Amplifier

RU-PA40D - 40 W Stereo Audio Power Amp with VCA & Power Supply

RU-PA40DE - 40W VCA Controlled Stereo Power Amplifier

TX-PA40D - 40 W Stereo Audio Power Amplifier

TX-PA40DE - 40W Stereo Audio Power Amplifier, 8ohms Output

EZ-MXA20_INSTALLATION_MANUAL.pdf 775 kb - Instructions

Project List

EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width

EZ-DC1
Desktop Chassis for 1/6 Rack Width for EZ Products

EZ-DC2
Desktop Chassis for 1/3 Rack Width EZ Products

EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width

EZ-SD1
Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6

EZ-SD2
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6

EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width EZ Products

EZ-UCB2
Under Counter Bracket Pair for all EZ Product Widths

Suggested Products

Avia 12x8 Digital Signal Processor

by Crestron Electronics, Inc.

MGP Series Mixing Console, 12 Line Inputs (4 Mono and 4 Stereo)

by Yamaha Corporation

12-channel Mixing Console

by Yamaha Corporation